With the Smartwares SH8-99112 Smart Carbon Monoxide alarm set you protect your family and you are always informed when carbon monoxide is measured in your home. This carbon monoxide detector set can be connected and immediately gives a notification on your smartphone via the Link (not included) when the gas is detected in the house. This way you are always warned in time and you can prevent carbon monoxide poisoning. The Smart carbon monoxide detector set is an extension of the PRO series. This allows you to also connect the carbon monoxide detector with 12 other smoke and carbon monoxide detectors from this series.
Carbon monoxide, a lethal intruder within your home
In winter time, people tend to cosy up on the couch with the heating on. Especially than, carbon monoxide is lurking around the corner. When the heating sources are not properly maintained, carbon monoxide can be released. Carbon monoxide isn’t only dangerous in winter. Even in summer one can suffer from carbon monoxide poisoning. When the temperature outside is higher than the temperature of the boiler, carbon monoxide can’t escape the pipes and will remain in your home. Therefore one must be cautious for carbon monoxide poisoning in summer as well. Carbon monoxide is a lethal gas, which is not detectable with our senses. Therefore, it is of the utmost importance to have one or more alarms installed, to make sure you are warned in time.
Install your carbon monoxide alarm in the right place
A carbon monoxide alarm functions best when it is placed on the ceiling, when the heat source is located in the same room. If there is no heat source located in the room, the carbon monoxide alarm should be placed on the wall. Place the CO alarm at a centralized location, at minimum of 30 cm away from the walls and at a horizontal distance of 1-3 meters from the possible source of Carbon monoxide. When you place the alarm on the wall, this should be at least 15-80 cm from the ceiling. The ideal spot to hang a carbon monoxide alarm is in the same room as the boiler or the gas-stove. The alarm can be mounted using a number of screws.
Test and maintain
It is of the utmost importance to test the device monthly. With the smart Smartwares carbon monoxide alarm, this can be easily done via the test button on the device itself. You also receive a notification when the battery of your carbon monoxide alarm needs replacement after approximately one year.
Turn your home into a smart home
Make your house even smarter with other products from the PRO series. Secure your house with a smart door window contact or create the perfect lightning with our smart bulbs. The PRO series offers multiple solutions which all communicate via the Smartwares link, this enables you to integrate all devices in one app. This set consists of a Carbon monoxide detector and the link gateway, so you can make your Carbon monoxide detector smart. The alarm can be connected with all smoke and CO alarms from the PRO series. This is the start of your smart home.
What’s in the box:
2x Smartwares Carbon monoxide alarms, screws and mounting material, manual
Reasons to choose the Smartwares SH8-99112 Smart Carbon Monoxide Detector set:
- The smart carbon monoxide detector warns you with a loud signal of 85 dB and a notification on your smartphone when carbon monoxide is detected.
- The detectors can be linked with each other and other smoke and carbon monoxide detectors from the PRO series within a range of approximately 60 meters. They will trigger each other in the case of carbon monoxide or smoke.