Smartwares FGA-13031 Carbon monoxide alarm FGA-1303

Protect yourself and your family against carbon monoxide with the Smartwares FGA-13031 Carbon monoxide alarm. The alarm provides a loud alarm when carbon monoxide is detected so you can act fast. Carbon monoxide is a silent danger because you cannot see, touch or smell it. That is why the Smartwares Carbon monoxide detector is of great importance in every home, office or workplace.

Carbon monoxide, an invisible danger
Every year, an average of 15 people die from carbon monoxide poisoning and a few hundred people end up in the hospital. Carbon monoxide is a major hazard especially in winter. We then close our windows and switch the heater on again. Poor use of a combustion devices such as a stove, boiler or geyser can release carbon monoxide. Carbon monoxide is very dangerous, you can get sick unknowingly very quickly. That is why installing a carbon monoxide detector is very important. A carbon monoxide alarm saves lives.

A loud warning
When carbon monoxide is detected, the carbon monoxide alarm will provide a loud signal of 85 dB and LED lighting will light up. This signal is already triggered at a low amount of the toxic gas so that you can quickly take action to bring yourself and your family to safety. When the poison is detected, it is important to open windows and doors and go outside. This way the gas can disappear from your house and you are safe again.

Easy installation
The carbon monoxide alarm functions optimally when it is mounted at least 1.5 meters above the ground and at least 1.85 meters from a combustion device. An ideal place to hang the detector is for example near the boiler or near the gas stove in the kitchen. The detector can be hung up via a number of screws.

Test and maintenance
It is very important to test the detector monthly. The detector comes with batteries that last for 1 year and the detector itself only needs to be replaced after 10 years. Although the batteries last for 1 year, it is important to continue testing the carbon monoxide via the test button on the detector. In addition, it is important to keep the detector clean. Clean it with a wet cloth to remove dust and dirt.

What’s in the box:
Carbon monoxide alarm, 6LR61 battery, mounting material, manual

Reasons to choose the Smartwares FGA-13031 Carbon Monoxide Detector:

• Always be warned in time when too much carbon monoxide is detected thanks to the carbon monoxide detector
• The 85 dB alarm sounds when the carbon monoxide concentration is too high
• Easy to place near combustion devices with a few screws
• For use with central heating boilers, fireplaces, boilers, kitchens or other rooms
• Simply test the detector by pressing the test button